EMB-SIK NxT – Industrial Low-NOx Burner for Gas – ESA Pyronics

Industrial Burners

Product Details

  • Mixer body: Cast iron G25
  • Gas inlet body: Cast iron G25
  • Flame tubes: Silicon Carbide
  • Combustion head: AISI310S
  • Fixing flange: Fe
  • Pre-heated air: from 200°C to 500°C
  • Capacity range: from 100 to 700kW
  • Air and gas pressure at burner: 50 mbar
  • Adequate to different types of gas: CH4/LPG/propane/etc.
  • NxT technology
  • Turndown range: 1:5
  • Easily replaced electrodes

EMB-SIK-NxT series are nozzle mix burners. Gas and air are mixed only on the combustion head, thus flashback is prevented. This allows adjustments on stoichiometric ratio and excess air. The air stream as well as the particular shape of the silicon carbide flame tube create a stiff flame allowing high heat penetration in the combustion chamber. Maximum capacities are obtained with 50 mbar of air pressure.

Downloads

Support

Onsite Diagnostics

If you require onsite diagnostics or technical assistance with any of our products please give us a call

01905 797989 Contact

Service

We recommend Duomo Gas Detection products are serviced at least annually to ensure efficacy and extend sensor life. Our qualified team of engineers are available Nationwide.

Service

All rights reserved © Duomo 2020.