APU 200 – Fan Purge Unit

Gas Flare & Purge Units

The APU 200 - Fan Purge Unit is designed for the direct purging of pipework from natural gas to air. It is intended to be used in conjunction with the Purge Unit with integral meter which is available as an optional extra item in 100 and 150 mm models.

It can also be used to pressurise pipework for tightness testing. This fan is capable of providing about 100 mbar and can be used for combined strength and tightness tests.

The APU 200 – Fan Purge Unit is designed for direct purging of pipework from natural gas to air. Used alongside the Purge Unit with integral meter which is available in 100 and 150 mm models.

If you require a smaller fan the APU 150 – Fan Purge Unit is 32mm.

The APU 200 can also be used to pressurise pipework for tightness testing. This fan is capable of providing about 100 mbar and can be used for combined strength and tightness tests.

All Soundness Testing and Purging must be carried out as set down in IGEM publications UP/1, or UP/1A. If the volume is less than 1 cubic metre [35.3 cubic feet] with operating pressure below 40 mbar]. Depending upon resistances, the unit provides up to about 50 m3/h of air.

Downloads

Support

Onsite Diagnostics

If you require onsite diagnostics or technical assistance with any of our products please give us a call

01905 797989 Contact

Service

We recommend Duomo Gas Detection products are serviced at least annually to ensure efficacy and extend sensor life. Our qualified team of engineers are available Nationwide.

Service

All rights reserved © Duomo 2020.