Senseair K30 – 030-8-0006 – CO2 OEM Engine
The CO2 Engine K30 can be customised for a variety of sensing and control applications. This platform is designed to be an OEM module for built-in applications in a host apparatus. K30 is a flexible product with two analogue outputs and two digital outputs that can be configured with SADK or other custom software to meet your requirement. This product is flexible, easy to be configured and maintenance-free.
Senseair product code: 030-8-0006
You may be interested in...
Our Senseair K30 OEM modules including the K30 are for high volume applications. Modules are intended to be integrated into our customers’ own products. They can easily be adjusted to comply with differing requirements. Creativity and inventiveness are the only restrictions for OEM modules.
SenseAir® K30™ platform is due to size and design for manufacture, a cost-optimised and easily fitted module solution for CO2 measurements. Balancing the key aspects of utility, quality, accuracy, operational lifetime and cost.
Connect it to any host controller or system by UART or I2C communicating digitally by Modbus over serial line, or sample its measurement by the analogue voltage signal outputs. The K30 platform samples CO2 in air. It is internally calibrated to compensate for a wide operational temperature range.
This maintenance free device helps you save money by decreasing your energy consumption while creating a healthier indoor climate. This is achieved in normal indoor applications using the Senseair ABC algorithm.
- Senseair product code: 030-8-0006
- 0 to 5000 ppm
- Accuracy: ±30 ppm ±3% of reading
- Senseair ABC Algorithm - Maintenance-free in normal applications
- Life Expectancy > 15 years
- Operation temperature range: 0 to 50 °C
- Operation humidity range: 0 to 95% RH (non-condensing)
- Power supply: 4.5 to 14.0 V DC
- Response time: 20 sec diffusion time
- Warm-up time: 1 min
- Communication: Uart ( Modbus)
- Dimensions: 57 mm x 51 mm x 14 mm
If you require onsite diagnostics or technical assistance with any of our products please contact us
We recommend Duomo Gas Detection products are serviced at least annually to ensure efficacy and extend sensor life. Our qualified team of engineers are available Nationwide.Service
346.14 KB | pdfDownload
Support & Service
If you require technical assistance or an annual service on this product please contact us and we will be happy to help. Our qualified team of engineers are available Nationwide.