Home 9 Product 9 KLC 10 Flamonitec UV Flame Detector

KLC 10 Flamonitec UV Flame Detector

Compact flame detectors combine sensor technology, flame evaluation and signal output conveniently in one housing. Flamonitec compact flame detectors are available in different housings for every application, whether for heating technology or for industrial requirements. Another advantage is the simple integration into the firing control system.

from £181.50

from £181.50

You may be interested in...

KLC 10 Flamonitec + Flamonitec Flame detector KLC 11
Price for all: £396.00

KLC 10 Flamonitec UV Flame detector

The KLC 10 Flamonitec is a UV flame detector compatible with all burner management boxes from Dungs, Siemens, Satronic & Fireye. It can be used as a direct replacement for a Dungs FLW. Specially designed for single burner firing systems that produce almost no radiation in the visible light spectrum or operate with very low flame modulation. The UV tube used ensures that background radiation, e.g. from glowing brick linings or mixing equipment parts, is not detected.

The flame signal intensity can be easily recognised via an LED as a visual indicator. The KLC 10 can be connected directly to the ionisation or LDR input of the automatic burner control system. It is compatible in its dimensions, connection dimensions and pin assignment with other devices from the KLC series. All accessories are therefore identical and reduce the variety of parts in production and service.

The flame detector KLC 10 Flamonitec is designed in accordance with EN298:2012-11 for automatic burner control systems that check whether a flame signal is still present after a control shutdown, even though the flame amplifier is permanently energised.

The KLC 10 is a UV flame detector specially designed for single burner firing systems that produce almost no radiation in the visible light spectrum or operate with very low flame modulation. The UV tube used ensures that background radiation, e.g. from glowing brick linings or mixing equipment parts, is not detected.

The flame signal intensity can be easily recognised via an LED as a visual indicator. The KLC 10 can be connected directly to the ionisation or LDR input of the automatic burner control system. It is compatible in its dimensions, connection dimensions and pin assignment with other devices from the KLC series. All accessories are therefore identical and reduce the variety of parts in production and service.

The flame detector KLC 10 is designed in accordance with EN298:2012-11 for automatic burner control systems that check whether a flame signal is still present after a control shutdown, even though the flame amplifier is permanently energised.

The KLC 10 should be installed tightly and with direct alignment to the flame. It is to be mounted by means of the mounting flange KLC or a suitable holder with 14 mm opening. The flame detector must be firmly inserted into the holder. No extraneous light should fall on the sensor.

To prevent interference, avoid direct sight of an ignition spark. Disturbances in the pre-ventilation phase can be caused by this. The maximum cable length of the connection cable must be observed. The connection cable must be kept separate from high-energy ignition and mains cables and must not be laid parallel to them over long distances. For safety reasons, there must be at least one control shutdown per 24 hours. For the KLC 10 version, in order to check the UV tube in accordance with EN 298, the automatic burner control to be used must check the flame detector for the presence of a flame signal after the control shutdown. Otherwise, use the KLC 11 version.

Features

Product Details

  • Intermittent operation
  • Compact design
  • Transistor output
  • Quick change in the plant possible
  • Insensitive to daylight
  • Can be connected directly instead of ionization probes or LDR

Support

Onsite Diagnostics

If you require onsite diagnostics or technical assistance with any of our products please contact us

  • This field is for validation purposes and should be left unchanged.

Service

We recommend Duomo Gas Detection products are serviced at least annually to ensure efficacy and extend sensor life. Our qualified team of engineers are available Nationwide.

Service

Datasheets

  • ๎™

    UV Flame Detector KLC 10 Operating Manual

    1.66 MB | pdf

    Download
  • ๎™

    UV Flame Detector KLC 10 Technical Information

    3.24 MB | pdf

    Download
potrait_chris_blue_sq-250x250

Support & Service

If you require technical assistance or an annual service on this product please contact us and we will be happy to help. Our qualified team of engineers are available Nationwide.

Duomo (UK) Ltd

Pin It on Pinterest